Siel Green Point 6:20KVA Specifications download pdf (Page 23)

SP121E Rev. 000 Siel S.p.A. Pag. 23 of 42

Issued date: 2005-05-06

GREEN POINT

8.4 DB9 female “RS 232-1” PC connection

Can be used to connect the UPS to a computer 9 pin DB9 type male connector. The UPS transmission

protocol preset by the factory is as follows: - 9600 baud, - no parity, - 8 bit,- 1 stop bit.

The transmission speed can be configured using the CUSTOMISATION menu on the panel from 1200 to

9600 baud.

Recommended transmission speeds in relation to transmission distance:

9600 baud 50m, 4800 baud 100m, 2400 baud 200m, 1200 baud 300m

To connect the UPS to a PC, use a shielded pin to pin cable (AWG22÷28) and only connect the shielding to

the computer end.

8.5 DB9 male “RS 232-2” MODEM connection

Can be used to connect the UPS to a Modem. 9 pin DB9 type male connector. The transmission protocol

preset by the factory is as follows: - 9600 baud, - no parity, - 8 bit,- 1 stop bit.

The transmission speed can be configured using the CUSTOMISATION menu on the panel from 1200 to

9600 baud.

Recommended transmission speeds in relation to transmission distance:

9600 baud 50m, 4800 baud 100m, 2400 baud 200m, 1200 baud 300m

To connect the UPS to a PC, use a shielded pin to pin cable (AWG22÷28) and only connect the shielding to

the computer end.

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 41 42

No comments

Siel Green Point 6:20KVA Specifications Page 23